Products Name	Custom Machined Curved Hollow Needle Component for Suturing - Made to Customer Drawing
Material	Stainless Steel, Brass, Aluminum, brass, copper ,etc
Surface Treatment	Sandblasting, polishing, knurling, laser marking, etc
Tube Outer Diameter	0.25-15mm
Tube Wall Thickness	0.05-3mm
Meta Base	Male and Female thread
Tolerance	OD/ID±0.02mm L±0.05mm or According to Drawing
Size	Customized
LOGO	Can be customized according to your drawing
Samples	Usually provide 5-10pcs samples for testing before mass production
Delivery Time	Usually 35-45days or according to quantity

Custom Machined Curved Hollow Needle Component for Suturing - Made to Customer Drawing

Product Advantages:

Manufactured from high performance medical stainless steel, providing excellent hardness and bending resistance for surgical suturing operations.
Precision curved forming with stable arc radius, fits surgical stitching track and reduces operation difficulty for medical devices.
Sharp cutting tip with burr‑free edge, realizes smooth tissue penetration and minimizes damage to contact tissue.
Fine polished surface avoids tissue scratch, maintains stable performance during repeated suturing cycles.
Needle diameter, arc radius, needle length and tip style can be fully customized according to technical drawings or samples.

FAQ:

Q1: What stainless steel grades are available for this curved suture needle component?

A1: SUS304 and SUS316L stainless steel are available. Material certificates can be provided upon request.

Q2: Can we adjust arc radius and needle thickness for our device requirements?

A2: Yes. Arc radius, wire diameter and total needle length are fully customizable. Please mark all parameters on the technical drawing.

Q3: What dimensional tolerance can you achieve for the curved needle component?

A3: Regular tolerance is ±0.02 mm for outer dimensions and arc forming. The exact value depends on needle size and forming requirements.

Q4: Do you accept sample trials for equipment performance verification?

A4: Yes, sample orders are supported. Sample cost and lead time depend on needle diameter, arc forming and tip processing. Lead time is typically 30 to 40 days after drawing and material confirmation. Please send your drawing for an accurate quotation.

Q5: Can both solid and hollow curved needle structures be produced?

A5: Yes, both solid and hollow curved needle structures are available. Please clarify the structure requirement in your drawing.

Disclaimer

Shenzhen Shomea Hardware Products Co., Ltd. is a precision metal components manufacturer, not a medical device distributor. All parts shown on this page are custom machined according to the buyer's drawings, samples and specifications.

We do not sell finished medical devices, sterile devices, IVD reagents or surgical instruments. All components are supplied non-sterile and unfinished.

The purchaser, as the medical device manufacturer or equipment brand owner, is solely responsible for device design validation, biocompatibility evaluation, sterilization validation, labeling and regulatory approval of the finished medical device.

Custom Machined Metal Needle Components

Custom Probe & Fluidic Components for Analytical Instruments

Small-diameter Tube Processing

Citizen Swiss-Machined Precision Components

Custom Machined Components for Dental Implant OEMs.

Custom Machined Metal Needle Components

Pencil Point Needle Tubing

Sharp Bevel Tip Cannula

Puncture Cannula Components

Custom Probe & Fluidic Components for Analytical Instruments

Small-diameter Tube Processing

Citizen Swiss-Machined Precision Components

Custom Machined Components for Dental Implant OEMs.

products details